These three tools located in:
/usr/local/sbin atfcnvr atflash atinfo
Full document from ATTO:
https://www.atto.com/software/files/manuals/Manual_HBACLI.pdf
Example of dual 8Gb card installed but no Fibre Channel cables connected:
# atinfo -i all ###################################################################### Channel 1: ATTO Celerity FC-82EN ###################################################################### Node Address: 20:00:00:10:86:03:A7:C4 PCI Vendor ID: 11F8 PCI Device ID: 8032 PCI Subsystem Vendor ID: 117C PCI Subsystem Device ID: 003B PCI Location: 133.0.0 PCI Class Code: 0C0400 PCI Revision ID: 08 Current PCI Link Width: x8 Maximum PCI Link Width: x8 Current PCI Link Speed: 5 GT/s Maximum PCI Link Speed: 5 GT/s Interrupt Mode: MSI-X MSI Vector Count: 1 MSI I/O Vector Count: N/A Driver Name: celerity8fc Driver Version: 2.10 Firmware Version: 06.01.00 Flash Version: 02/28/2013 Controller State: Operational No devices found. No logical units found. ###################################################################### Channel 2: ATTO Celerity FC-82EN ###################################################################### Node Address: 20:00:00:10:86:03:A7:C5 PCI Vendor ID: 11F8 PCI Device ID: 8032 PCI Subsystem Vendor ID: 117C PCI Subsystem Device ID: 003B PCI Location: 133.0.1 PCI Class Code: 0C0400 PCI Revision ID: 08 Current PCI Link Width: x8 Maximum PCI Link Width: x8 Current PCI Link Speed: 5 GT/s Maximum PCI Link Speed: 5 GT/s Interrupt Mode: MSI-X MSI Vector Count: 1 MSI I/O Vector Count: N/A Driver Name: celerity8fc Driver Version: 2.10 Firmware Version: 06.01.00 Flash Version: 02/28/2013 Controller State: Operational No devices found. No logical units found.
0 Comments