This is what you get on the serial port when booting up the 2730, comes alive a few seconds from power up and gets the # prompt pretty quick too.
Loading controller... Use new code in primary. ...copy primary...decomp...exit loader... Starting VxWorks ... initElanRegs Done... Dumping chipset info... REVID 0xFFFEF000 0x11 CPUCTL 0xFFFEF002 0x1 HBCTL 0xFFFEF060 0x500 SYSARBCTL 0xFFFEF070 0x2 SYARBMENB 0xFFFEF072 0x8 ARBPRICTL 0xFFFEF074 0x40000F03 PIOFS L 0xFFFEFC20 0x2004 PIOFS H 0xFFFEFC22 0x14 PIO DIR L 0xFFFEFC2A 0x2B9 PIO DIR H 0xFFFEFC2C 0x0 PIO DAT L 0xFFFEFC30 0xEE3F PIO DAT H 0xFFFEFC32 0xFFFB Chipset info done. MC CODE: W420R86 Oct 11 2012 13:44:58 Hold down Spacebar key to enter diags... Entering POST... Checking PCI bus integrity...Test passed. IP = 172.024.255.231 MAC = 00:c0:ff:0a:68:5f POST Done. COM 2 ----------------------------------------- Copyright (c) 2006 BUILD TIME: Oct 11 2012 13:44:52 ----------------------------------------- IP Address = 172.024.255.231 IP Mask = 255.255.255.000 Gateway = 172.024.255.001 MAC = 00:c0:ff:0a:68:5f R/Evo 2730-2R System Name: System Location: Version: W420R86 #
0 Comments