Changing the UPS manufacturing date on SFAOS 12K...

Robert Leong -

Changing the UPS/BBU manufacturing dates, tested on SFA12KX. 

Limitations

SFA7700 does not supported changing of dates.

Older firmware such as 2.0.0.3 does not support setting of the date, see "Older Firmware" below.

Procedure

Use show ups all to identify UPS Enclosure Index number and Position number, in this example it is 0 and 1 respectively.

set ups 0 1 battery 2015:12:30 to set new manufacturing date.

Related parts are color matched for easier correlations.

Session log: 

RAID[0]$ show ups all

******************
*     UPS(s)     *
******************

Sub Index:              1
Sub OID:                0x80000001
Enclosure Index:        0
Enclosure OID:          0x50000000
Position:               1
Fault Status:           OK
SES Status:             OK
Charge Level:           100%
Hold-Up Time Remaining: 12 minutes
Enabled:                TRUE
AC Failed:              FALSE
Present:                TRUE
Interface Failed:       FALSE
UPS Failed:             FALSE
Battery Health:         OK
Fault Indicator:        OFF
Predicted Failure Ind:  OFF
Locate Indicator:       OFF
Nominal Input Voltage:  240 Volts
Current Input Voltage:  201 Volts
Battery Mfg. Date:      Mon Oct 26 2015
Battery Life Remaining: 462 days
Part number:            Eaton 5P 1550
Serial number:          G297F11218
Firmware version:       02.08.0016

Sub Index:              1
Sub OID:                0x80000001
Enclosure Index:        11
Enclosure OID:          0x5000000b
Position:               1
Fault Status:           OK
SES Status:             OK
Charge Level:           100%
Hold-Up Time Remaining: 12 minutes
Enabled:                TRUE
AC Failed:              FALSE
Present:                TRUE
Interface Failed:       FALSE
UPS Failed:             FALSE
Battery Health:         OK
Fault Indicator:        OFF
Predicted Failure Ind:  OFF
Locate Indicator:       OFF
Nominal Input Voltage:  240 Volts
Current Input Voltage:  202 Volts
Battery Mfg. Date:      Mon Oct 26 2015
Battery Life Remaining: 462 days
Part number:            Eaton 5P 1550
Serial number:          G297F11217
Firmware version:       02.08.0016

Total UPS: 2

RAID[0]$ set ups 0 1 battery 2015:12:30
UPS at ENCLOSURE 0 OID=0x50000000 UPS 1 OID=0x80000001 attributes set with STATUS='Success' (0x7fff00000000)

RAID[0]$ show ups all

******************
*     UPS(s)     *
******************

Sub Index:              1
Sub OID:                0x80000001
Enclosure Index:        0
Enclosure OID:          0x50000000
Position:               1
Fault Status:           OK
SES Status:             OK
Charge Level:           100%
Hold-Up Time Remaining: 12 minutes
Enabled:                TRUE
AC Failed:              FALSE
Present:                TRUE
Interface Failed:       FALSE
UPS Failed:             FALSE
Battery Health:         OK
Fault Indicator:        OFF
Predicted Failure Ind:  OFF
Locate Indicator:       OFF
Nominal Input Voltage:  240 Volts
Current Input Voltage:  201 Volts
Battery Mfg. Date:      Wed Dec 30 2015
Battery Life Remaining: 526 days
Part number:            Eaton 5P 1550
Serial number:          G297F11218
Firmware version:       02.08.0016

Sub Index:              1
Sub OID:                0x80000001
Enclosure Index:        11
Enclosure OID:          0x5000000b
Position:               1
Fault Status:           OK
SES Status:             OK
Charge Level:           100%
Hold-Up Time Remaining: 12 minutes
Enabled:                TRUE
AC Failed:              FALSE
Present:                TRUE
Interface Failed:       FALSE
UPS Failed:             FALSE
Battery Health:         OK
Fault Indicator:        OFF
Predicted Failure Ind:  OFF
Locate Indicator:       OFF
Nominal Input Voltage:  240 Volts
Current Input Voltage:  202 Volts
Battery Mfg. Date:      Mon Oct 26 2015
Battery Life Remaining: 462 days
Part number:            Eaton 5P 1550
Serial number:          G297F11217
Firmware version:       02.08.0016

Total UPS: 2

RAID[0]$ set ups 11 1 battery 2015:12:30
UPS at ENCLOSURE 11 OID=0x5000000b UPS 1 OID=0x80000001 attributes set with STATUS='Success' (0x7fff00000000)

RAID[0]$ show ups all

******************
*     UPS(s)     *
******************

Sub Index:              1
Sub OID:                0x80000001
Enclosure Index:        0
Enclosure OID:          0x50000000
Position:               1
Fault Status:           OK
SES Status:             OK
Charge Level:           100%
Hold-Up Time Remaining: 12 minutes
Enabled:                TRUE
AC Failed:              FALSE
Present:                TRUE
Interface Failed:       FALSE
UPS Failed:             FALSE
Battery Health:         OK
Fault Indicator:        OFF
Predicted Failure Ind:  OFF
Locate Indicator:       OFF
Nominal Input Voltage:  240 Volts
Current Input Voltage:  201 Volts
Battery Mfg. Date:      Wed Dec 30 2015
Battery Life Remaining: 526 days
Part number:            Eaton 5P 1550
Serial number:          G297F11218
Firmware version:       02.08.0016

Sub Index:              1
Sub OID:                0x80000001
Enclosure Index:        11
Enclosure OID:          0x5000000b
Position:               1
Fault Status:           OK
SES Status:             OK
Charge Level:           100%
Hold-Up Time Remaining: 12 minutes
Enabled:                TRUE
AC Failed:              FALSE
Present:                TRUE
Interface Failed:       FALSE
UPS Failed:             FALSE
Battery Health:         OK
Fault Indicator:        OFF
Predicted Failure Ind:  OFF
Locate Indicator:       OFF
Nominal Input Voltage:  240 Volts
Current Input Voltage:  202 Volts
Battery Mfg. Date:      Wed Dec 30 2015
Battery Life Remaining: 526 days
Part number:            Eaton 5P 1550
Serial number:          G297F11217
Firmware version:       02.08.0016

Total UPS: 2

Older Firmware

Older firmware such as 2.0.0.3 does not support setting of the date but only resets it to today and expires in two years.

Reset the dates with these commands:

clear cont 0 ups_history
clear cont 1 ups_history

 

 

 

 

 

Have more questions? Submit a request

0 Comments

Article is closed for comments.