DDN:
To download the CLI command guide GoTo: http://www.ddn.com/support/product-downloads-and-documentation > S2A9900 Series
There are a few SNMP related settings, most are under "NETWORK"
The MIB is attached 9xxx-mib.zip
DotHill:
To download the Admin guide GoTo: http://crc.dothill.com/article.asp?article=1897&p=2
There is a LOT of info about SNMP in this guide.
To download the mib GoTo: http://crc.dothill.com/article.asp?article=2455&p=2 (or attached fa22orig.zip)
QLogic:
To Download a comprehensive user's guide GoTo: http://filedownloads.qlogic.com/files/Manual/81355/UserGuide_5800V_Series_QuickTools_v80_59264-02B.pdf
To download the mib go to http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/SearchByProd.aspx?ProductCategory=41&Product=1045&ProductName=SANbox%205800V
RHEL:
There is a walkthrough and explanation at: https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/sect-System_Monitoring_Tools-Net-SNMP-Configuring.html
The config file is /etc/snmp/snmp.conf
Supermicro:
From CLI on the MDS you can use the command "ipmicfg-linux.x86_64" to get or set IPMI info. You can also use the web admin by going to the IP of the MDS via HTTPS (ex. https://10.0.0.4) which offers some management info.
http://www.supermicro.com/manuals/other/Embedded_BMC_IPMI.pdf
0 Comments