In general back-revision clients (e.g., StorNext 4.3.x clients with StorNext 5.0.x MDC) are supported for the interval of time that is required to upgrade a configuration; with the assumption that once the configuration process is complete, all clients would be at the same level. The following table describes back-revision clients that are supported with this release.
| StorNext SAN Client Version | Platform |
|---|---|
| StorNext 4.0.x StorNext 4.1.x |
Certain back-revision clients, as follows, are supported:
|
| StorNext 4.2.x | Quantum recommends that clients be upgraded along with the MDC. |
| StorNext 4.3.x | Quantum recommends that clients be upgraded along with the MDC. |
| StorNext 4.6.x | Quantum recommends that clients be upgraded along with the MDC. |
| StorNext 4.7.x | Certain back-revision clients, as follows, are supported:
|
| StorNext 5 release 5.x | Quantum recommends that clients be upgraded along with the MDC. |
General information on client interoperability:
- The StorNext MDC must be running an equivalent or more recent version of StorNext than the client is running.
- All components (e.g. File System, Storage Manager, etc.) installed on the same machine must be running the same version of StorNext.
- The StorNext DDM mover component must be at the same version at that running on the MDC.
source: Revs_StorNext_5_Compatibility_Guide - page 16
0 Comments