Get a supportsave from Brocade

Robert Leong -

A session log of getting "supportsave" from a Brocade switch.

Session from Brocade 6510, this generated 50+ .gz files totalling a little over 5 MBytes.

SW6510:FID128:admin> supportsave
This command collects RASLOG, TRACE, supportShow, core file, FFDC data
and then transfer them to a FTP/SCP/SFTP server or a USB device.
This operation can take several minutes.
NOTE: supportSave will transfer existing trace dump file first, then
automatically generate and transfer latest one. There will be two trace dump
files transferred after this command.
OK to proceed? (yes, y, no, n): [no] y

Host IP or Host Name: 192.168.101.222
User Name: root
Password:
Protocol (ftp | scp | sftp): scp
Remote Directory: /tmp/dvs

Do you want to continue with CRA (Y/N) [N]: y

Saving support information for switch:SW6510, module:RAS...
...................................................................................
Saving support information for switch:SW6510, module:FTRACE_START...
Saving support information for switch:SW6510, module:CTRACE_OLD...
Saving support information for switch:SW6510, module:CTRACE_OLD_MNT...
.....
.....
.....

Saving support information for switch:SW6510, module:CORE_FFDC...
Saving support information for switch:SW6510, module:RAS_POST...
.........

SupportSave completed.
SW6510:FID128:admin>

 

 

 

 

Have more questions? Submit a request

0 Comments

Article is closed for comments.