Connecting the Tangent CP200 panel ( used only on Clipster systems )
Connect the Tangent to your network ( DHCP ) it will connect via DHCP.
Do not connect the network cable from the panel directly to the Clipster.
Go to the Clipster config tab, default tab, control panel.
Select control panel LX. DHCP and select trackball must be selected.
Enter the CC panel ID number, then select apply.
You must toggle between between control panel and control panel LX for the LX panel to be activated in Clipster.
The track ball name will change from red to green then back to red.
Close the config tab.
0 Comments