Rack mount instructions 4u and 5u chassis, Clipster/Fuze/Pronto/...

Robert Leong -

Using General Devices rack rails PN C-230-S-124 MOD (CC2301-99-0101).

1.  Mount the rails to the rack per vertical location as shown, mounting holes marked as X below.  
     Rack depth is 24 inches min to 32.5 inches max.

                               ________
                              |_ o 
                           5u |_ o 
    ________                  |_ o ____
   |  o                       |_ o 
4u |  o                    4u |_ o
   |_ o ____                  |_ o ____
   |  o                       |_ o
3u |  X <<<                3u |_ X <<<
   |_ X <<<_                  |_ X <<<_
   |  X <<<                   |_ X <<<
2u |  X <<<                2u |_ X <<<
   |_ o ____                  |_ o ____
   |  o                       |_ o
1u |  o                    1u |_ o
   |_ o ____                  |_ o ____

   4u Chassis                 5u Chassis

 

2.   4u chassis, mount the slider to the chassis as shown, the slider is mounted center vertically with 4 screws.  These screws might be packaged in a separate kit.

 4u_slider.1.1.jpg

 

3.   5u chassis, mount the slider to the chassis as show, the slider is mounted lower than center vertically with 7 screws.  These screws might be packaged in a separate kit.

 5u_slider.1.1.jpg

 

 

 

Have more questions? Submit a request

0 Comments

Article is closed for comments.