Clipster version 4.7.x.x

Robert Leong -

Clipster 4.7.x.x 


Clipster will not operate version 4.x without an appropriate license enabled on your Clipster, in most cases this is a paid upgrade from a pre 4.x version.

Click here for installation and licensing instructions


Product Announcements [PDF]


Clipster 4.7.5.8_build92203 [201 MB] (Firmware included)

{top - direct_link}

Includes: ChangeLog + Installer [181MB] + Firmware:

Clipster: Gen4 (HydraX [13MB] + DigiLab [12MB]) & Gen3 (HydraX [6MB] + DigiLab [12MB])
Fuze: Gen4 (HydraX [13MB] + DigiLab [9MB]) & Gen3 (HydraX [6MB] + DigiLab [9MB])

Version 4.7.5.8
---------------
- Driver: Fixed potential frame delay between DVI and SDI outputs on Digilab. DVS#2043994 
- Edittool: Batch finalize now always disabled if DCP validation is enabled. #18853
- Edittool: Added configurable time code fps for pulldown finalizing. #19156
- Edittool: Fixed broken outpoint handling of the SlaveModeDialog. 
- Fileformats: Fixed OP1A 29.97/59.94 fps audio reading issue. 
- Fileformats: Added support for 16bit RGBA DPX files. DVS#2057915 
- Fileformats: Fixed field dominance issue with some MXF files with MPEG essence. #19091, #19425
- Fileformats: Added support for Cineon files with little endian data. DVS#2048654 
- Fileformats: Improved disk I/O performance for some QuickTime file types. #19409
- Fileformats: Added configuration for TGA and TIFF library selection in avus.ini. #19443
- Fileformats: Added read support for mixed-DNxHD-essence QuickTime Movies. #19584, #19991

Version 4.7.5.7
---------------
Fixed
- Edittool: Minor fixes
- Fileformats: Fixed possible crash after failing to open a QuickTime file for reading. 


Version 4.7.5.6
---------------
Added
- Edittool: Added configurable time code fps for pulldown finalizing.  
- Fileformats: Added read support for mixed-DNxHD-essence QuickTime Movies. Zendesk
- Fileformats: Added configuration for TGA and TIFF library selection in avus.ini. Zendesk

Fixed
- Edittool: Batch finalize now always disabled if DCP validation is enabled.  
- General: Dongle check reactivated.

Improved
- Fileformats: Improved disk I/O performance while reading large QuickTime files with single-sample time code tracks. Zendesk


Version 4.7.5.5
---------------
Fixed
- Edittool: Minor fixes
- Edittool: Fixed wrong number of wavelet resolution levels used for 4k J2k encode in batch finalize. 

Improved
- Edittool: Improved activation of split screen mode in conforming tool.  

  

Clipster 4.7.5.5_build84093 [201 MiB]

{top - direct_link}

Includes: ChangeLog + Installer [181MiB] + Firmware:

Clipster: Gen4 (HydraX [13MiB] + DigiLab [12MiB]) & Gen3 (Hydra [6MiB] + DigiLab [12MiB])
Fuze: Gen4 (HydraX [13MiB] + DigiLab [9MiB]) & Gen3 (Hydra [6MiB] + DigiLab [9MiB])

Version 4.7.5.5
---------------

Added

Fixed
- Edittool: Minor fixes
- Edittool: Fixed wrong number of wavelet resolution levels used for 4k J2k encode in batch finalize.

Changed

Improved
- Edittool: Improved activation of split screen mode in conforming tool.

Updated

Version 4.7.5.4

http://www.dvsus.com/gold/clipster/4.7.5.4.zip

Version 4.7.5.2

http://www.dvsus.com/gold/clipster/4.7.5.2.zip

Main changes of this version are: 

- Edittool: Fixed Bin import of audio clips with uneven channel count.   FS#11368  OTRS#2038437 
- Edittool: Fixed Zoom+pan operator's lost ability of entering negative numbers into the pixel entry fields for Pan and Vergence.  FS#10913  Zendesk#15517 
- Edittool: Added option to keep original filename when reusing assets in DCI workflow. 
- Rendering: Fixed FinalizeDialog's wrong JPEG2000 file size when changing frame rate or S3D (on/off) AFTER changing the JPEG2000 bit rate.  FS#10786,  OTRS#2037326 
- Rendering: Fixed wrong MXF header information when rendering MXF J2K LRCP files.  FS#11470  Zendesk#15499 
- Fileformats: Added additional fallbacks to DVS QuickTime reader to cope with corrupt sound sample descriptions.  Zendesk#15553 
- Fileformats: Consolidated and improved video frame rate calculation for all QuickTime readers.   Zendesk#13983 
- Fileformats: Fixed Phantom decode artifacts on left and right image boundaries.   OTRS#2031719 
- Fileformats: Fixed XDCamIMX AES audio reading issue.  OTRS#2043505  OTRS#2043348. OTRS2042677 
- Fileformats: Added read support for the Elemental Technologies flavor of H.264 in QuickTime files.   OTRS#2042150 
- Fileformats: Fixed crash while reading some MXF files.

---------------

Firmware versions
-----------------
Venice 3.2.76.6_19_15
Pronto3 3.2.76.6_19_15
DCI Accelerator (1.0) 2.114.11.0_39.3
Cine4k 1.0.30.15-4.5.0-1.14.18
Fuze (gen4) 1.0.34.8-2.14.0-1.14.18
Clipster (gen4) 1.0.34.8-4.5.0-4.11.0-1.14.18
Fuze (gen3) 1.0.32.29-2.14.0-1.14.18
Clipster (gen3) 1.0.32.29-4.5.0-4.11.0-1.14.18
DCI Accelerator (2.0) 2.1.13.15_2.0.19
VeniceII 4.3.0.22_4.0.20
VeniceIII 7.4.0.6_7.0.10
Pronto4 4.3.0.22_4.0.20
Pronto4HDMI 7.4.0.11_7.0.10
HydraRAW 1.1.16.5_1.10.3

 

Added

Fixed
- Fileformats: Fixed XDCamIMX AES audio reading issue.
- Edittool: Fixed Zoom+pan operator's lost ability of entering negative numbers into the pixel entry fields for Pan and Vergence.
- Fileformats: Fixed Phantom decode artifacts on left and right image boundaries.

Changed

Improved


Updated

http://www.dvsus.com/gold/clipster/4.7.5.1.zip

 

Version 4.7.5.1
---------------

Added

Fixed
- General: Fixed Bin import of audio clips with uneven channel count.
- Edittool: Fixed potential slow bin import of container files with audio.

Changed

Improved


Updated

http://www.dvsus.com/gold/clipster/4.7.5.0.zip

 

Version 4.7.5.0
---------------

Added

Fixed
- Edittool: Fixed cropping in DCI finalize although cropping was deactivated. Zendesk
- Driver: Crosssync support implemented for QUADSDI raster on Digilab (Clipster)
- Driver: Fixed potential field order problem in interlaced HD rasters (Zendesk
- Driver: Fixed audio resync problem in slave mode with non-SDI rasters.
- Edittool: Fixed missing hashes in an encrypted DCI CPL when creating a supplemental DCP.

Changed

Improved


Updated

 

http://www.dvsus.com/gold/clipster/4.7.4.0.zip
Version 4.7.4.0
---------------

Added
- Edittool: Implemented check on 'Language' tag when importing a DCI subtitle into the Bin

Fixed
- Rendering: Fixed surplus of pluses in (23Hz) audio playlists, which could cause missing audio assets. Zendesk
- Driver: Fix for small deviations in black images or cropping areas of encoded JPEG2000 images. FS10602
- Rendering: Fixed truncated AS02 files in case of render errors during finalize.
- Edittool: Fixed 'KDM only' generation if the CPL is unsigned.
- Edittool: Fixed XML namespace for SMPTE CPL Caption Language tag.
- Driver: Fixed handling of 1D-Luts for source clips with RGB colorspace and head range. Zendesk

Changed

Improved

Updated


Version 4.7.3.0
---------------

Added
- Fileformats: Added import support for H.264 QuickTime Movies with 'ElGt' vendor code.
- Fileformats: Added export support for CineForm in QuickTime Movies via the GoPro QuickTime component.

Fixed
- Conformingtool: Fix for some types of negative speed effects in EDLs
- Edittool: Fixed ARRI ALEXA clips created using a firmware version greater 3.0 being treated as firmware version 1.0 by the Alexa Raw decode operator.
- Fileformats: Fixed no thumbnails being generated for ARRI ALEXA clips created using a firmware version greater 3.0.

Changed
- Edittool: Encrypted DCPs in 'SMPTE Phase 2' mode now create 'DCI any' KDMs if only a recipient certificate is given.
- Edittool: Don't add KDM recipient certificate to 'DCI specific' TDL

Improved

Updated


Version 4.7.2.1
---------------

Added

Fixed

Changed

Improved

Updated


Version 4.7.2.0
---------------

Added

Fixed
- RealtimeServer: Fix for reading 3rd party XDCamHD files.
- Capturetool: Fixed incorrect video overlay aspect ratio in VTR emulation mode.
- Capturetool: Fixed DC MXF capture failure problem with identical file names for audio and video files.

Changed

Improved

Updated


Version 4.7.1.2
---------------

Added

Fixed
- Edittool: Fixed standalone DCP validation for a DCP loaded in Clipster at the same time.
- Edittool: Fixed blocking of DCI batch finalizing with missing signing keys.

Changed

Improved

Updated


Version 4.7.1.1
---------------

Added

Fixed
- VTREmulation: Fixed saving of old audio buffers at start of slavemode recording
- Capturetool: Fixed aspect ratio calculation (was only correct for Quicktime before)
- Edittool: DCI key check at Clipster startup is only done if DCI mastering is licensed.

Changed

Improved

Updated


Version 4.7.1.0
---------------

Added

Fixed
- Edittool: Fixed multiple subtitle tracks with same type and language when loading a CPL.
- Edittool: Fixed PNG subtitle depth detection which was not working under certain conditions.

Changed
- Edittool: Fixed TI subtitle version. The source's TI subtitle version is now kept.

Improved

Updated

Version 4.7.0.10
---------------

Added

Fixed

Changed

Improved

Updated


Version 4.7.0.9
---------------

Added

Fixed

Changed

Improved

Updated


Version 4.7.0.8
---------------

Added

Fixed

Changed

Improved

Updated


Version 4.7.0.7
---------------

Added
- Edittool: Added 3D LUT checkbox to timeline window.

Fixed

Changed

Improved

Updated


Version 4.7.0.6
---------------

Added

Fixed

Changed

Improved

Updated


Version 4.7.0.5
---------------

Added

Fixed

Changed

Improved

Updated


Version 4.7.0.4
---------------

Added

Fixed
- Edittool: Minor fixes

Changed

Improved

Updated


Version 4.7.0.3
---------------

Added

Fixed
- Edittool: Minor fixes

Changed

Improved

Updated


Version 4.7.0.2
---------------

Added
- Fileformats: Added support for PHANTOM Miro M120 camera.
- Fileformats: Added default gamma correction for PHANTOM CINE clips played in source viewer.
- Fileformats: Added support for importing SMPTE source time codes from PHANTOM CINE V701+ clips.

Fixed
- Edittool: Restricted raster list in DCI workflow to DCI compliant raters

Changed

Improved
- Edittool: Improved decryption key check at Clipster startup.

Updated


Version 4.7.0.1
---------------

Added
- Finalizing: Added new finalize format: MPEG-4.
- Finalizing: Added new finalize format: H264Stream.
- Finalizing: Added H.264 codec settings.
- Finalizing: Added AAC/AC-3 codec settings (currently bitrate only).

Fixed
- Edittool: Minor fixes
- Finalizing: Fixed CPL/KDM file name in batch finalize.

Changed

Improved

Updated
- Fileformats: Updated PNG reference library to version 1.5.9.
- Fileformats: Updated RED R3DSDK to version 4.3 19A15 20120304.


Version 4.7.0.0
---------------

Added
- Edittool: Added Ctrl-G keyboard shortcut to edit display position
- Rendering: Fixed duplication of subtitle elements in subtitle xml files.
- Edittool: Added "TL sync" button to finalize dialog and DCI wizard.
- Fileformats: Added XML-preset based mono track labeling for QuickTime renderings.
- Fileformats: Added support for Blackmagic 'r210' to DVS QuickTime reader.
- Fileformats: Added support for MXF OP1A AVCIntra.
- Edittool: Added first incarnation of RMD sidecar support to R3D RAW decode operator.

Fixed
- Edittool: Minor fixes
- Edittool: Fixed 1st cc operator update after restricting it to CDL parameters.
- Rendering: Fixed timeline time code offset not being honored if finalizing WAV/RF64.
- Rendering: Fixed video time code offset changes not being processed if no video is finalized.
- Rendering: Fixed doubled subtitle elements when creating supplemental DCPs with added subtitles.
- Fileformats: Fixed MPEG DC-MXF files indicated as interlaced when being progressive.

Changed
- Fileformats: Renamed 'MXF JPEG2000' to 'MXF JPEG2000 LRCP'

Improved
- Edittool: Implemented timeline global subtitle depth detection
- Edittool: Implemented multi selection for subtitle depth detection
- Fileformats: Improved frame rate calculation of DVS QuickTime reader for files containing still frames.

Updated
- Fileformats: Updated OpenEXR SDK to openexr 1.7.0 / ilmbase 1.0.2.
- Documentation: Updated to version 3.7 (for Clipster, FUZE, Pronto and Cine4K)
- Fileformats: Updated RED R3DSDK to version 4.2 18C34 20111219.

 

 

 

 http://www.dvsus.com/gold/clipster/4.7.4.0.zip

http://www.dvsus.com/gold/clipster/4.7.3.1.zip  NBC black level fix for DCP’s - no firmware with this version -

http://www.dvsus.com/gold/clipster/4.7.3.0.zip

http://www.dvsus.com/gold/clipster/4.7.2.1.zip

http://www.dvsus.com/gold/clipster/4.7.1.2.zip

http://www.dvsus.com/gold/clipster/4.7.0.10.zip

Have more questions? Submit a request

0 Comments

Article is closed for comments.